| |
Load
Cells : STRAINSENSE
ENTERPRISES, INC.
manufactures a wide assortment of standard grade and calibration
load cells. Each load cell is specifically designed to meet ASTM
specifications and customer requirements both physically and electrically.
SSC load cells incorporate proper alloys and must pass a rigid
control check. Every load cell is individually machined by highly
skilled machinists and instrumented and assembled by highly skilled,
dedicated individuals with state of the art technology.
Typical Load Cells:
Standard Compression - Typically designed with a flat base and
radius top.
Standard Tension - can be designed with male threads, female threads,
or a male/female combination.
Standard Tension/Compression - Typically designed with female
threads and a screw-in compression load button. In some high capacity
models, the unit can be designed with male threads and a radius
top for compression testing.
|
Hollow
Tension/Compression - Generally used for cable testing
application, Can be fitted with a rocker top to equalize
load distribution for compression testing and internal
or external threads for tension testing.
Low Profile Compression - Used in application where clearance
is a problem, Can be designed with a fixed radius or flat
swivel top. Swivel top allows load cell to align to off
center loading.
|
Low Profile
Tension/Compression - Center hub designed with a female thread
and an outer bolt circle to meet required specifications for tension
testing. For models where tension and compression are required,
a screw-in radius top is provided.
Reaction Torque Sensors - Designed electrically and mechanically
to fit required specifications.
|
Custom
Designed - Engineering and design services are available
where applications have to conform to certain mechanical
dimensions and /or electrical specifications.
Metric Models - All of the above listed cells can be designed
as Metric units.
|
|
|
|
|
