The unique design of the CONAMP 20 System enables ONE OPERATOR to perform a complete certification, or load check, by operating the testing machine and recording the digital indicated results with increased accuracy.

Basic CONAMP 20 System has the following features: Front panel zero and span controls

Concealed zero and span controls for scaling future applications

Built-in self calibration circuit

LED Digital display scaled to indicate as per customer request

Solid state, hand wired components for high accuracy and long term stability

Digital indicator packaged in attractive aluminum case with teakwood trim

Adjustable bail for direct viewing

Custom load cells designed for any capacity from: 10 to 3,000,000 lbf or higher

Load cell jacket bright chromed for wear and appearance

Load cells sealed for normal lab and plant environments

Chromed folding handles on load cells over 300,000 lbf capacity

Integral connectors on load cells

Systems available for tension compression or both

System can be designed for existing customer load cells

ENTIRE SYSTEM MANUFACTURED IN USA

AVAILABLE OPTIONS

System designed to indicate
in Engineering units with single or Multiple load ranges

Increased digital resolution

New programmable load monitor

With extended digital resolution

Analog output

Digital RS232 output for direct Input to a computer or printer

Tunable digital filter

Program lockout feature

Dual Range Capability

System uses single or multiple load cells
Each cell has low and high range capability

Multi-channel system

Individual inputs for multiple load cells
Independent zero, gain, and 'push to cal' circuitry for multiple
load cell systems Summing capability for multiple load cells to
single channel systems

System designed to indicate in two or more modes

English pounds English tons Inch/lbs Foot/lbs Newtons

Kilonewtons Grams Kilograms Metric tones

Custom designed to operate at various input voltages

US power requirements
International power requirements

Custom constructed shipping/carrying cases

Fiberglass/wood or aluminum construction
1" polyethylene padding
Hinge top with carrying handles

Steel loading plate sets for compression testing

Prevents the top and bottom of the load cells from being damaged Parallel ground, steel compression disc for top of each load cell Each top plate numbered with appropriate serial number and witness mark for alignment purposes A hardened tool steel base plate machined with target lines for each additional load cell.

Special tooling for tension testing

Custom couplings

Custom adapters

Custom tension rods

Swivel assemblies for uniaxial loading

Certification

ASTM E-74
ASTM E-4

Description: The Digicell 320 Load Cell System utilizes a new concept of having the conditioning electronics and the digital monitor designed and built directly into the body of the load cells as one unit. The system is self powered, designed with state of the art components, and it uses a LCD indicator to monitor the resultant load.

Calibration Systems New Compact Digitized Load Cell For further versatility, the case housing the digital monitor/conditioning electronics can be readily removed from the load cell and used remotely with an interconnecting cable where circumstances prevent an operator from getting close enough to the load cell to read the monitor. The system can be used as a primary calibration system for checking force machines on a routine basis.

SYSTEM BREAKDOWN: The basic system comes complete with either a tension, compression, or a combination tension/compression load cell; a single load range indicating in engineering units or percent' a remote "hold load" control switch; a 12 foot long interconnecting cable; and a battery charger.

SYSTEM FEATURES: Extremely compact, lightweight, and easy to use Battery powered and rechargeable - (Common 9 volt battery used). Can be operated on AC voltage Digital Monitor. Can be removed and used remotely from the cell Hold load for one man operation. Front panel zero and span controls Built-in self calibration circuit for one or two ranges. Digital monitor scaled to engineering units or percent (See Options) Bright chromed load cell jacket Latest state of the art components for accuracy and long range stability. Chromed folding handles Systems available for tension, compression, or both Ranges from 1,000 to 3,000,000 pounds.

OPTIONS: The system can be designed with the following options:

1. To monitor and display the resultant load in engineering units of force (pounds, kips, kilograms, kilonewtoms, etc.) or percent (0-100.00%)

2. With the two ranges of the customer's choice. Normally, the low range is no less that ten (10) percent of the maximum range of the load cell.

3. With a Tension Load Cell, a Compression Load Cell, or a combination Tension and Compression Load Cell.

4. The Interconnecting Cable length can be made to the customer's requirements. The normal cable supplied with the system is twelve (12) feet long.

5. A custom designed shipping/carrying case constructed of 1/8" thick aluminum and lined with a 1" polyethylene complete with hinge cover, hasp and handle.